The SLM2200 2.2m³ Self Loading Concrete Mixer Truck is a compact, fully integrated concrete production machine designed for contractors, construction companies, infrastructure developers, government projects, and equipment rental businesses that require reliable concrete mixing directly on the job site. Combining loading, weighing, mixing, transporting, and discharging into a single machine, the SLM2200 significantly reduces labor requirements, equipment investment, and project operating costs.
Equipped with a 2.2m³ mixing drum, 270° hydraulic drum rotation, automatic loading bucket, and a 4WD articulated chassis, this self loading concrete mixer truck can independently load raw materials, produce high-quality concrete, transport the mixture across rough terrain, and discharge concrete precisely at the pouring location. The hydraulic rotating drum allows flexible unloading from multiple directions without repeatedly repositioning the machine, making it highly efficient for foundations, walls, columns, drainage systems, road construction, and remote infrastructure projects.
For international buyers looking for a dependable 2.2m³ self loading concrete mixer truck, the SLM2200 offers an excellent combination of productivity, mobility, durability, and low maintenance requirements. It is widely used in Africa, Southeast Asia, the Middle East, South America, and Central Asia, where construction sites often require independent concrete production without access to stationary batching plants.
The SLM2200 has been engineered for construction environments where concrete must be produced quickly, transported efficiently, and discharged accurately. Compared with traditional batching methods that require loaders, mixers, transit trucks, and multiple workers, the SLM2200 enables a single operator to complete the entire concrete production process.
The SLM2200 produces 2.2 cubic meters of finished concrete per mixing cycle, providing significantly higher productivity than smaller self loading mixers while remaining compact enough for rural, urban, and remote construction environments.
The mixing drum can rotate 270 degrees hydraulically, allowing concrete to be discharged to different sides of the vehicle without moving the machine repeatedly. This improves pouring efficiency and reduces material waste on foundations, retaining walls, culverts, and road construction projects.
The integrated loading bucket automatically loads sand, gravel, and other aggregates into the mixing drum. The onboard weighing system helps maintain consistent concrete quality, while the hydraulic mixing and transportation functions allow fresh concrete to be produced directly where it is needed.
The four-wheel-drive articulated chassis provides excellent traction and maneuverability on muddy roads, gravel surfaces, farmland, mountain terrain, construction sites, and undeveloped rural areas. The SLM2200 is designed for locations where conventional concrete mixer trucks cannot easily operate.
The SLM2200 reduces labor requirements by allowing one trained operator to load materials, control water supply, mix concrete, transport the batch, and discharge concrete directly at the pouring location. This significantly lowers labor costs and improves overall project efficiency.
Because the machine combines the functions of a loader, batching unit, concrete mixer, transport vehicle, and discharge equipment, contractors can reduce equipment purchases, fuel consumption, maintenance expenses, and project operating costs.
Construction projects in developing markets often face poor road conditions, limited infrastructure, labor shortages, and long transportation distances from commercial concrete batching plants. The SLM2200 is specifically designed to solve these challenges by producing fresh concrete directly at the point of use.
The operator can independently load cement, sand, gravel, and water, complete the mixing cycle, and deliver concrete immediately to the pouring location. This eliminates delays caused by concrete transportation, prevents concrete from setting during transit, and ensures consistent concrete quality even on remote construction sites.
This makes the SLM2200 2.2m³ self loading concrete mixer truck especially suitable for village housing projects, mountain roads, irrigation canals, bridge approaches, agricultural infrastructure, mining support construction, and municipal maintenance works.
Whether you are a construction contractor, equipment distributor, government procurement supplier, or machinery rental company, the SLM2200 provides strong commercial value through high concrete productivity, easy transportation, simple maintenance, and OEM customization support. The machine can be supplied with different engine options, colors, branding, decals, and export configurations to meet the requirements of international equipment dealers and private-label partners.
Compared with traditional concrete production methods, the SLM2200 reduces material handling time, minimizes labor requirements, shortens project schedules, and improves profitability for small and medium-sized construction projects.
The SLM2200 2.2m³ Self Loading Concrete Mixer Truck is a compact, fully integrated concrete production machine designed for contractors, construction companies, infrastructure developers, government projects, and equipment rental businesses that require reliable concrete mixing directly on the job site. Combining loading, weighing, mixing, transporting, and discharging into a single machine, the SLM2200 significantly reduces labor requirements, equipment investment, and project operating costs.
Equipped with a 2.2m³ mixing drum, 270° hydraulic drum rotation, automatic loading bucket, and a 4WD articulated chassis, this self loading concrete mixer truck can independently load raw materials, produce high-quality concrete, transport the mixture across rough terrain, and discharge concrete precisely at the pouring location. The hydraulic rotating drum allows flexible unloading from multiple directions without repeatedly repositioning the machine, making it highly efficient for foundations, walls, columns, drainage systems, road construction, and remote infrastructure projects.
For international buyers looking for a dependable 2.2m³ self loading concrete mixer truck, the SLM2200 offers an excellent combination of productivity, mobility, durability, and low maintenance requirements. It is widely used in Africa, Southeast Asia, the Middle East, South America, and Central Asia, where construction sites often require independent concrete production without access to stationary batching plants.
The SLM2200 has been engineered for construction environments where concrete must be produced quickly, transported efficiently, and discharged accurately. Compared with traditional batching methods that require loaders, mixers, transit trucks, and multiple workers, the SLM2200 enables a single operator to complete the entire concrete production process.
The SLM2200 produces 2.2 cubic meters of finished concrete per mixing cycle, providing significantly higher productivity than smaller self loading mixers while remaining compact enough for rural, urban, and remote construction environments.
The mixing drum can rotate 270 degrees hydraulically, allowing concrete to be discharged to different sides of the vehicle without moving the machine repeatedly. This improves pouring efficiency and reduces material waste on foundations, retaining walls, culverts, and road construction projects.
The integrated loading bucket automatically loads sand, gravel, and other aggregates into the mixing drum. The onboard weighing system helps maintain consistent concrete quality, while the hydraulic mixing and transportation functions allow fresh concrete to be produced directly where it is needed.
The four-wheel-drive articulated chassis provides excellent traction and maneuverability on muddy roads, gravel surfaces, farmland, mountain terrain, construction sites, and undeveloped rural areas. The SLM2200 is designed for locations where conventional concrete mixer trucks cannot easily operate.
The SLM2200 reduces labor requirements by allowing one trained operator to load materials, control water supply, mix concrete, transport the batch, and discharge concrete directly at the pouring location. This significantly lowers labor costs and improves overall project efficiency.
Because the machine combines the functions of a loader, batching unit, concrete mixer, transport vehicle, and discharge equipment, contractors can reduce equipment purchases, fuel consumption, maintenance expenses, and project operating costs.
Construction projects in developing markets often face poor road conditions, limited infrastructure, labor shortages, and long transportation distances from commercial concrete batching plants. The SLM2200 is specifically designed to solve these challenges by producing fresh concrete directly at the point of use.
The operator can independently load cement, sand, gravel, and water, complete the mixing cycle, and deliver concrete immediately to the pouring location. This eliminates delays caused by concrete transportation, prevents concrete from setting during transit, and ensures consistent concrete quality even on remote construction sites.
This makes the SLM2200 2.2m³ self loading concrete mixer truck especially suitable for village housing projects, mountain roads, irrigation canals, bridge approaches, agricultural infrastructure, mining support construction, and municipal maintenance works.
Whether you are a construction contractor, equipment distributor, government procurement supplier, or machinery rental company, the SLM2200 provides strong commercial value through high concrete productivity, easy transportation, simple maintenance, and OEM customization support. The machine can be supplied with different engine options, colors, branding, decals, and export configurations to meet the requirements of international equipment dealers and private-label partners.
Compared with traditional concrete production methods, the SLM2200 reduces material handling time, minimizes labor requirements, shortens project schedules, and improves profitability for small and medium-sized construction projects.
```htmlThe TL 2.2m³ Self Loading Concrete Mixer Truck is designed as an integrated mobile concrete production and transportation machine. Its 2.2m³ actual agitation capacity, 4WD drivetrain, hydraulic loading bucket, automatic water supply system, onboard weighing system, and 270° hydraulic drum rotation allow contractors to produce and place fresh concrete directly at the construction site.
The following specifications are provided to help international buyers evaluate machine capacity, mobility, concrete production capability, transportation requirements, and job-site suitability. Actual performance can vary according to aggregate moisture, concrete mix design, operator experience, road conditions, loading distance, mixing time, and discharge conditions.
| Technical Parameter | Specification |
|---|---|
| Product Type | Self Loading Concrete Mixer Truck |
| Model | TL 2.2m³ |
| Actual Agitation Capacity | 2.2 m³ per batch |
| Mixing Tank Capacity | 4.1 m³ |
| Drum Rotation Speed | 18 rpm |
| Drum Discharge Rotation | 270° hydraulic rotation |
| Drum Rotation Direction | Clockwise for feeding and counterclockwise for discharge |
| Concrete Slump Range | 70–260 mm |
| Hydraulic Transmission | Hydraulic transmission system |
| Oil Pump | CBGJ40/50 |
| Hydraulic Motor | BMS-200 |
| Reducer Ratio | 1:30 |
| Engine Model | YN38GBZ |
| Engine Displacement | 3.8 L |
| Rated Engine Power | 78 kW |
| Maximum Torque | 260–232 N·m / 1800–2400 rpm |
| Maximum Travel Speed | 28 km/h |
| Minimum Turning Radius | 3300 mm |
| Gradeability | 26% |
| Drive System | 4WD / Four-wheel drive |
| Tire Size | 23.5/70-16 |
| Maximum Loading Weight | 6500 kg |
| Wheelbase | 2500 mm |
| Loading Bucket Capacity | 0.5 m³ |
| Water Supply | Automatic water filling system |
| Water Tank Capacity | 600 L |
| Equipped Weight | 6200 kg |
| Overall Dimensions (L × W × H) | 5200 × 2250 × 2850 mm |
The TL 2.2m³ self loading mixer is designed to produce approximately 2.2 cubic meters of agitated concrete per batch. This capacity provides a practical balance between concrete production volume and machine mobility for small and medium-sized construction projects.
A 2.2m³ capacity is particularly useful when concrete is required at multiple locations rather than at one fixed pouring point. Instead of transporting ready-mixed concrete from a distant batching plant, contractors can produce fresh concrete closer to the work face.
Important: hourly concrete productivity should not be treated as a fixed machine specification. Actual hourly output depends on the complete working cycle, including aggregate loading, weighing, water filling, mixing, travel, discharge, and repositioning. Buyers should calculate expected production according to their actual project conditions rather than relying only on nominal batch capacity.
The machine is equipped with a 4.1m³ mixing tank while the specified actual agitation capacity is 2.2m³ per batch. This distinction is important when comparing concrete mixer specifications from different manufacturers.
Buyers should distinguish between geometric drum or tank volume and the manufacturer's stated concrete agitation output. Using one consistent capacity definition throughout the product page helps prevent confusion and improves technical credibility for international buyers.
The mixing drum rotates at approximately 18 rpm, allowing continuous movement of aggregate, cement, water, and other concrete materials during the mixing cycle.
Correct mixing performance depends not only on drum speed but also on mixing blade design, material loading sequence, water addition, concrete formulation, mixing duration, and operator procedure.
One of the most important features of this machine is its 270° hydraulic drum rotation for concrete discharge. The operator can rotate the mixing drum toward the required discharge position, allowing fresh concrete to be placed in different directions around the machine.
This is particularly valuable when working beside foundations, road edges, drainage channels, building walls, retaining structures, culverts, and other areas where repeatedly repositioning a fully loaded machine would reduce productivity.
The 270° discharge function also gives contractors greater flexibility when working on narrow or irregular construction sites. Instead of treating the machine only as a transport vehicle, the operator can use the drum rotation system to position concrete closer to the actual pouring point.
The TL 2.2m³ model is equipped with a YN38GBZ diesel engine with a stated displacement of 3.8 liters and rated power of 78 kW.
The engine provides power for vehicle travel, hydraulic functions, loading operations, drum mixing, and other machine systems. For projects involving rough roads, frequent loading cycles, and remote job sites, engine power should be evaluated together with drivetrain configuration, machine weight, tire specification, and gradeability.
The four-wheel-drive system is designed for construction environments where conventional road-going concrete mixer trucks may have difficulty operating.
The TL 2.2m³ mixer can be used on gravel roads, muddy construction areas, rural roads, farmland, uneven ground, and other challenging job-site surfaces. Actual climbing and traction performance depends on ground conditions, payload, tire condition, slope, and operator technique.
The specified 26% gradeability provides an important reference for buyers working in hilly, mountainous, or uneven construction environments.
For international procurement, gradeability should always be considered together with loaded vehicle weight, road surface, slope length, tire condition, and safety requirements. Buyers should request a working demonstration or test video when the machine will be used in steep terrain.
The integrated 0.5m³ loading bucket allows the operator to load aggregate and other concrete materials directly into the mixing system without requiring a separate wheel loader for routine material loading.
This all-in-one configuration is one of the main advantages of a self loading concrete mixer truck. It can reduce the number of machines required on smaller projects and simplify material handling at remote sites.
The machine uses an automatic water filling system with a 600-liter water tank. An integrated water system allows the operator to add water during the concrete production cycle without depending entirely on an external water truck or manual bucket filling.
For consistent concrete quality, water addition should always follow the project mix design and required concrete workability. The operator should not add uncontrolled water simply to increase slump.
The specified equipped weight of the TL 2.2m³ self loading concrete mixer is approximately 6200 kg. This value should be considered when planning transportation, site access, bridge loading restrictions, trailer selection, and project logistics.
The overall machine dimensions are approximately 5200 mm long, 2250 mm wide, and 2850 mm high. These dimensions provide a useful reference when evaluating container shipping, transport trailers, warehouse access, construction gates, and road conditions.
International buyers should always confirm the final shipping dimensions and transport configuration with the supplier before booking freight because dimensions can vary according to tires, optional equipment, mirrors, discharge components, and shipping preparation.
The TL 2.2m³ is designed for projects where contractors need mobile concrete production, flexible transportation, and on-site discharge without relying entirely on a stationary batching plant or external ready-mix supplier.
The machine is suitable for rural roads, village roads, farm access roads, road shoulders, culverts, drainage structures, and localized road repair. Its 4WD configuration helps it move between material stockpiles and different pouring locations.
For housing projects, villas, foundations, floors, columns, driveways, retaining walls, and other concrete structures, the TL 2.2m³ can produce fresh concrete close to the construction area.
Agricultural projects frequently require concrete for irrigation channels, pump foundations, water tanks, farm buildings, drainage systems, livestock facilities, and storage structures. The self loading configuration is useful when construction sites are far from urban concrete suppliers.
Remote construction projects may face poor roads, long transport distances, limited labor, and unreliable access to ready-mix concrete. The TL 2.2m³ combines material loading, concrete mixing, transportation, and discharge in one machine, making it suitable for these conditions.
The machine can support municipal maintenance projects such as drainage repair, sidewalks, small bridge structures, road maintenance, utility foundations, and public infrastructure construction.
Small commercial buildings, workshops, warehouses, equipment foundations, fencing foundations, and site-development projects can benefit from flexible on-site concrete production.
For projects in areas where ready-mix concrete plants are limited or transportation distances are long, a mobile self loading mixer can provide greater independence. The 4WD chassis and integrated loading system are especially useful when aggregate stockpiles and construction locations are separated by rough roads.
The TL 2.2m³ can also be considered by equipment rental companies and contractors that need a multi-purpose concrete production machine. One machine can support different projects rather than being permanently tied to a single fixed batching location.
The key advantage of the TL 2.2m³ is not simply its concrete capacity. Its value comes from integrating several operations into one mobile machine: loading, weighing, mixing, transporting, and discharging.
For a conventional concrete production workflow, a contractor may need a loader to handle aggregates, a batching system to proportion materials, a mixer to produce concrete, and a transport vehicle to deliver the concrete. On smaller or remote projects, maintaining several machines can increase labor, fuel consumption, transport requirements, and maintenance exposure.
A self loading concrete mixer truck reduces this equipment dependency. One trained operator can perform the complete production cycle, while the 4WD chassis allows the machine to move directly between the material stockpile and the pouring location.
This makes the TL 2.2m³ particularly relevant for contractors working in Africa, Southeast Asia, Central Asia, the Middle East, and other markets where construction sites may be remote from stationary concrete batching plants.
The TL 2.2m³ model is positioned between smaller self loading mixers and higher-capacity machines. It is a practical option for contractors who need more production capacity than compact 1.2m³ or 1.5m³ machines but do not require the larger footprint of a 3.5m³ or higher-capacity mixer.
When selecting a model, buyers should compare batch capacity, daily concrete demand, road conditions, pouring distance, available labor, aggregate supply, water availability, transportation requirements, and maintenance support.
If your project involves scattered concrete pouring locations, remote roads, rural housing, irrigation infrastructure, or small-to-medium construction works, the TL 2.2m³ self loading concrete mixer truck can provide a flexible alternative to fixed concrete production equipment.
```For international buyers, transportation planning is an important part of purchasing a 2.2m³ self loading concrete mixer truck. The TL 2.2m³ has an approximate equipped weight of 6,200 kg and overall dimensions of approximately 5,200 × 2,250 × 2,850 mm (L × W × H).
These dimensions and weight should be used as the basic reference when requesting an international freight quotation. The final shipping configuration may vary according to export requirements, optional equipment, tires, mirrors, discharge components, protective packaging, and whether selected components are removed or secured separately for transportation.
| Shipping Information | Reference Data |
|---|---|
| Machine Model | TL 2.2m³ Self Loading Concrete Mixer Truck |
| Approx. Equipped Weight | 6,200 kg |
| Overall Length | 5,200 mm |
| Overall Width | 2,250 mm |
| Overall Height | 2,850 mm |
| Reference Volume Based on Overall Dimensions | Approx. 33.35 m³ |
| Transportation Method | To be confirmed according to destination, vessel, route and final shipping configuration |
The approximate dimensional envelope of the assembled machine is calculated from the overall dimensions and is not the same as the actual cargo volume charged by a shipping company. Freight forwarders may calculate charges according to weight, dimensions, loading method, equipment type, route, and special cargo requirements.
The machine measures approximately 2,850 mm in overall height. Because standard dry containers have limited internal height, buyers should not assume that the complete machine can be loaded upright into a standard 20-foot or 40-foot container without checking the actual loading configuration.
Depending on the destination and shipping route, possible transportation solutions may include a suitable open-top or flat-rack arrangement, Ro-Ro transportation, breakbulk shipment, or partial disassembly of selected components before loading. The final solution should be confirmed by the exporter and freight forwarder based on the actual machine configuration and destination port.
Before booking freight, international buyers should request a final packing list, shipping dimensions, gross weight, loading photographs, and recommended transportation method. This helps avoid unexpected port, handling, or special-equipment charges.
When requesting a shipping quotation, buyers should provide the following information:
For a fast quotation, send us your destination port, required quantity, and preferred Incoterm. Our sales team can then prepare a machine quotation and coordinate the shipping information with the freight forwarder.
The TL 2.2m³ self loading concrete mixer truck is suitable not only for individual contractors but also for construction equipment distributors, machinery dealers, rental companies, project suppliers and OEM partners.
For qualified distributors and long-term business partners, available customization options can include machine color, company logo, decals, warning labels, identification plates, product manuals and selected export documentation.
OEM requirements should be confirmed before production because customization can affect artwork approval, production time, identification plates, spare parts labeling and export preparation.
Construction equipment distributors can use the TL 2.2m³ as a mobile concrete equipment solution for contractors working in rural construction, infrastructure, housing, road construction and agricultural projects.
We can support distributor inquiries with product specifications, machine photographs, operating videos, quotation documents, spare-parts information and technical materials that can be used for local customer development.
The integrated loading, mixing, transportation and discharge functions make the TL 2.2m³ potentially suitable for rental businesses serving small and medium-sized contractors.
Rental companies should evaluate expected working hours, operator availability, local road conditions, maintenance capability, spare-parts access and customer application before adding the machine to a rental fleet.
Regular maintenance is essential for maintaining reliable performance of any self loading concrete mixer truck. Because the TL 2.2m³ combines a diesel engine, hydraulic transmission, loading system, mixing drum, water system and four-wheel-drive system, maintenance should cover both the vehicle and concrete-production components.
Concrete residue should not be allowed to accumulate inside the mixing drum. After operation, the drum should be cleaned according to the manufacturer's recommended procedure. Regular cleaning helps maintain mixing performance and reduces the risk of hardened concrete interfering with the drum and mixing blades.
The hydraulic system is responsible for important functions including loading, drum operation and discharge movement. Hydraulic oil, hoses, fittings, cylinders, pumps and motors should be inspected regularly according to the maintenance schedule.
If abnormal noise, excessive heat, hydraulic leakage or reduced operating speed occurs, the machine should be inspected before continued heavy-duty operation.
The YN38GBZ diesel engine and four-wheel-drive system should be serviced according to the engine manufacturer's recommended maintenance intervals. Oil, filters, coolant, belts, battery condition and other service items should be checked regularly.
Maintenance intervals may vary according to operating hours, ambient temperature, dust levels, fuel quality and workload. Buyers operating in high-dust or high-temperature environments should establish a more frequent inspection routine where appropriate.
For overseas customers, spare-parts availability is an important factor when selecting construction machinery. We recommend that customers identify commonly replaced service parts before shipment, especially when the machine will operate in remote areas.
Depending on the machine configuration, commonly required service items may include filters, seals, hydraulic hoses, hydraulic fittings, electrical components, belts, bearings, lubrication components and other wear parts.
For distributor orders and remote projects, customers can discuss a recommended spare-parts package before shipment. Preparing critical service parts together with the machine can reduce downtime caused by international transportation lead times.
For international construction equipment buyers, product photographs alone are not sufficient for evaluating a machine. Before shipment, buyers can request inspection and verification information covering the machine's major systems.
For overseas buyers who cannot visit the factory, a real operating video can provide useful evidence of the machine's working condition. We recommend requesting a video showing the actual machine performing aggregate loading, material mixing, driving, drum rotation and concrete discharge.
For customers placing a larger order, an independent third-party inspection can also be considered according to the purchase agreement and destination-market requirements.
The main value of the TL 2.2m³ self loading concrete mixer is its ability to combine several construction operations in one mobile machine.
| Construction Requirement | TL 2.2m³ Solution |
|---|---|
| Aggregate loading | Integrated 0.5m³ hydraulic loading bucket |
| Concrete mixing | Integrated mixing drum with approximately 2.2m³ actual agitation capacity |
| Material transportation | Self-propelled 4WD chassis |
| Concrete placement | 270° hydraulic drum rotation for flexible discharge |
| Water supply | Integrated 600 L water tank and automatic water filling system |
| Rough terrain operation | Four-wheel-drive configuration |
| Remote construction | Mobile concrete production without depending entirely on a fixed batching plant |
Looking for a 2.2m³ self loading concrete mixer truck for road construction, housing projects, irrigation works, rural infrastructure or remote construction?
Send us your project requirements and we can help you evaluate whether the TL 2.2m³ configuration is suitable for your application.
For an accurate international quotation, please provide your destination port and required quantity. We can then prepare the machine quotation, shipping information and recommended configuration for your project.
Need price, shipping cost or technical specifications?
Contact our sales team for the latest quotation, detailed specification sheet, operating video, spare-parts information and shipping options.
Send your destination port + quantity + application, and we will prepare a quotation for you.
If your project requires a different concrete production capacity, you can also compare our other concrete machinery solutions, including smaller self loading concrete mixers and higher-capacity models.
Explore our 1.5m³ Self Loading Concrete Mixer Truck for compact construction projects or compare it with our 3.5m³ Self Loading Concrete Mixer Truck when higher concrete output is required.
For material handling and site preparation, you can also explore our Mini Excavators and Wheel Loaders.
Below are answers to common questions from contractors, construction equipment dealers, rental companies and international buyers evaluating a 2.2m³ self loading concrete mixer truck.
The SLM2200 has a specified 2.2m³ actual agitation capacity per batch. Its mixing tank has a stated geometric capacity of approximately 4.1m³. Buyers should distinguish actual concrete output from total drum or tank volume when comparing different self loading concrete mixer models.
Yes. The machine is equipped with an integrated 0.5m³ hydraulic loading bucket. It can load aggregates and other concrete materials directly into the mixing system, reducing the need for a separate loader for routine material loading.
Yes. The SLM2200 uses a 270° hydraulic drum rotation system for flexible concrete discharge. This allows the operator to direct concrete toward different sides of the machine without repeatedly repositioning the entire vehicle.
No. The SLM2200 is a conventional self loading concrete mixer truck with a rotating mixing drum. It should not be described as a flat-mouth mixer. The product page, URL, title, specifications, image ALT text and structured data should consistently use the term 2.2m³ Self Loading Concrete Mixer Truck.
The machine is designed so that one trained operator can control the major working operations, including material loading, water supply, mixing, driving and concrete discharge. Actual staffing requirements depend on the project workflow and local safety regulations.
Yes. The machine uses a four-wheel-drive configuration and is designed for construction environments such as rural roads, gravel surfaces, farms, mountain areas and remote infrastructure projects. Actual off-road performance depends on ground conditions, payload, slope and tire condition.
The current specification identifies the engine as the YN38GBZ diesel engine, with a stated displacement of 3.8 liters and rated power of 78 kW. Engine configuration should be confirmed on the final quotation and specification sheet before ordering.
The SLM2200 is specified with a 600-liter water tank and an automatic water filling system. Water addition should be controlled according to the required concrete mix design rather than being added solely to increase concrete slump.
The specified overall dimensions are approximately 5,200 × 2,250 × 2,850 mm, and the equipped machine weight is approximately 6,200 kg. Final shipping dimensions and weight should be confirmed before freight booking because export configurations and optional equipment can affect transportation requirements.
The complete assembled machine should not automatically be assumed to fit inside a standard dry container because its specified overall height is approximately 2,850 mm. The final shipping method should be confirmed according to the destination, vessel, route and export configuration. Possible solutions may include suitable open-top, flat-rack, Ro-Ro or other transportation arrangements.
Typical applications include rural road construction, residential buildings, villa construction, irrigation works, drainage projects, farm infrastructure, foundations, bridge approaches, municipal maintenance and remote construction sites.
Spare-parts and technical-support requirements can be discussed before ordering. For overseas projects and distributor orders, customers can also request a recommended spare-parts package for commonly serviced components.
OEM and distributor requirements can be discussed for selected orders. Possible customization may include machine color, company logo, decals, identification plates, manuals and selected export configurations, subject to production requirements.
Because international pricing depends on configuration, quantity, destination and shipping terms, customers should request a quotation with their destination country, destination port, required quantity and preferred Incoterm, such as FOB, CFR or CIF.
For a more accurate quotation, please provide your destination port, required quantity, project application, preferred engine configuration if applicable, and whether you require FOB, CFR or CIF pricing. We can then provide the relevant machine specification and shipping information.
